Solid state rectifier and regulator. Replaces both your regulator and rectifier, or diode and rectifier.
Not suitable for electro-magnet alternators. For permanant magnet alternators only.
For single or 3-phase alternators (simply ignore one of the three yellow wires for single phase).
Dimensions: 80mm x 68mm x 29mm
Maximum recommended wattage: 200W.
Wiring: Yellow wires to your alternator, red to battery positive, green to battery negative, black to positive supply after the key switch.
Negative-earth systems only. Not compatible with positive-earth electrical systems.
Please note: incorrectly wiring this unit may render it inoperative. Unfortunately we can not accept returns of this item for this reason. If you are not confident in installing this unit, we suggest having a qualified auto electrician install it for you.
Mini switch block in black with a low-profile, curved fascia. Suit 7/8" handlebars. Designed by us here at MMCC, we've had the wires soldered on for you as we know how easy it is to destroy the switches by putting slightly too much heat in...
£18.00 - Sold Out
Mini switch block, chrome plated, low-profile, curved fascia. Suit 7/8" handlebars. Designed by us here at MMCC, we've had the wires soldered on for you as we know how easy it is to destroy the switches by putting slightly too much heat in during soldering....
Replacement switch for our low-profile switch blocks. Convert our switch block to dual-pushbutton! Great for controlling horn and start from the same side of the handlebars. The pushbutton is a momentary-on type. Pre-soldered with wires.